There is a blind bearing on one side for the gearbox shaft, this was a challenge to remove. Despite many discussions with experts on the Suzuki TS forum, the thing would not move. However, a trip to the Roman Baths in Bath helped solve this one. At Bath they had an exhibit that described how masons lifted stone using a Lewis Bolt.
 |
| The blind bearing to be removed. |
 |
| Using some DIY brackets to create a Lewis Bolt |
 |
| Place the bent bracket in first and then fill the hole with the others. |
 |
| Find a suitable clamp. |
 |
| Pop a bolt through the lined up holes. |
 |
| Draw it out. |
No comments:
Post a Comment